Welcome to our used hoist page. We stock used chain and used wire rope hoists. We also stock used cranes or can make an overhead crane using hoists on this webpage.
01527 854 600.
| HELP| |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG80 | 80 kilos SWL | Demag | Model DC-PRO-1-80 H5 V1 |
5 meters of chain drop. | 2 speeds lifting. 8 and 2 meters a minute lifting speed. |
| AG78 | 80kgs | Demag manulift | Man u lift | 3 mts drop of chain. | more details |
| AG33 | 125kg | GIS picture | GCH 250 1NF | 3 mts of chain drop | Almost new G.I.S. ECH, with eye suspension, picture. |
AG70-2 AG70-3 AG70-4 |
250kg | Demag chain hoist never used, still boxed, we have 3 of them. | Demag DKUN 2-250 KV1 | 3 mts TBC | more hoist details |
| AG56 | 250kg | Morris | S3 chain hoist | 3m of chain lift | photo |
| AG47 | 250 kgs | YALE | 415 volts three phase hoist | HOL 3.2 meters | 2 speed lifting |
| AG29 | 250kgs | Stahl | T202 |
 |
Ultra low headroom electric chain hoist. Stahl, T202, 230mm headroom loss from power trolley wheels to hook. |
| AG6 |
250
kgs |
Kone
|
KX5
chain hoists |
3
mts HOL |
We
have a number of used Kone KX5 electric chain hoists, with push trolleys
or top hook suspension. Safe working load is 0.25 tonnes. Pictures |
| AG15 | 250 kilos SWL | Abus | used chain hoist | 3 metres. | Used Abus electric chain hoist. Hoist Picture |
| AG17 | 250kgs | used jib crane | Swing jib | 3.2 | 250KG SWL used swing jib. We have six available. 4.15metres overall height, jib arm is slightly lower. Jib arm length 3.2 metres. Overall height 4130mm, height to under side of the arm 3000mm Picture and base sizes. |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
AG70 AG70-1 |
500kg | Demag chain hoists never used, still boxed, we have 2 left. | Demag DKUN 2-250 KV2 | 3 mts TBC | more hoist details |
| AG48 | 500 kilos | TBA | wall mounted jib arm | 2 meters | With or without a hoist. Picture |
| AG49 | 500kgs | Morris 3 -phase | electric hoist | n/a | more details to follow |
| AG31 | 500 kg | Used Demag jib | Over braced swing jib | 3.75 mts |
Demag used jib crane with 2 speed Demag electric hoist. |
| AG29 | 500kgs | Stahl | T202 |
|
Ultra low headroom electric chain hoist. Stahl, T202 with KUE powered trolley. 285mm headroom loss from hoist trolley wheels to hook bowl. Picture |
| AG12 | 0.5t | Demag Jib crane | used jib crane | 4.5 meter jib arm | Overall height 5830mm swing arm 4.55 meters. Comes fitted with a single speed Demag hoist. Removed due to factory move. Excellent working order. Picture |
| AG25 | 500 kgs | Stahl | T202 | 3 mts HOL | c/s push travel trolley, 8/2 meters a minute lifting speed. Picture |
| AG12 SOLD | 500kgs | Demag PK chain hoist | used PK hoist | 5 metres height of lift | 1 speed hoist |
| AG21 | 500 kg | Abus jib | 360 degrees jib crane | 4 meters | Jib arm height 4 meters, 4 meter jib arm length, 360 degree slew. Picture |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG72 | 1t SWL | SWF ECH's 2 off. | electric chain hoists, 2 off. | electric drive trolley | 20 meters drop of chain |
| AG62 AG62-1 | 1 tonne | 2 pairs of Donati end carriages (not a crane) | single girder 2 pairs in stock. | small... | single speed end carriages 20 meters a minute, as new. |
| AG22 | 1 tonne | Liftket | hoist | 3.5 metres HOL | 3 phase 1 tonne SWL Liftket electric 415 volt chain hoist, eye suspension. Unused, three phase 415 volts. Picture |
| AG8 | 1t SWL | Verlinde | A Frame | 4.21 metres. | Fellows and Stringer 'A' frame gantry crane, safe working load 1000kg. Footprint is: 4.21m long x 2.0m wide Maximum dimensions: 5.49m long x 2.0m wide x 3.14m high. Picture |
| AG9 |
1
tonne |
Demag
ECH |
eye
suspension |
2
metres hol |
Demag ECH. Model number DKUN 10-1000 KV1 F4. Safe working load 1000 kgs with single chain drop. Height of lift marked at 8.0m but believe poss 2 metres of pendant. Picture. 01527 854 600. |
| AG28 | 1.5 tonne | Sprint A-frame gantry |
With manual hoist
|
2.4 x 2.4 meters Total span - 2400mm height - 2400mm. It comes with test certificates for both gantry and hoist. This is disassembled at present. | Nearly new A-frame gantry. It is mounted on four casters for total movement around the workshop, with a hand operated William Hackett chain block (016.200) on push travel assembly.
|
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG41 | 2 ton | CM Loadstar | 3532 110 volt | 6.5 meters of chain drop | 110 volts single phase hoist with push beam or girder trolley. Picture. |
| SOLD | 2 tonne | Donati | chain hoist | 3 metres | monorail Donati hoist. electric lift c/w a electric power travelling trolley. Supplied serviced & tested. Picture |
| AG39 | 2 tonnes | Morris | double girder used Moris crane | 17 meters TBC | 2 speed all motions. Includes a Morris wire rope hoist and support steel work. 30 meters of free standing down-shop legs and gantry rails. Picture |
| AG27 | 2000 kilos | Sealey | manual chain block | 3 meters | Hand operated chain block 2000kgs, with hook suspension. As new. |
| AG59 | 3.2 t | used Demag PLV wire rope hoist, 4 meters a minute lift | 8 meters of lift. | 8 meters tbc | Single girder Demag crane with brand new end carriages. |
AG63 |
4t
|
R
Stahl |
electric
rope hoist, 2 speeds lifting and traversing |
HOL
TBA |
AS
2010 4/1 on 4 falls. |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG11 |
5
tonnes |
TBA |
TBA |
15 |
TBA 01527 854 600 |
| AG4-1 | 5.0 t | Stahl | single girder | 13 meters | Top running crane, suit 40mm crane rail. Picture |
| AG14 |
5
tonne |
Kone |
hoist
unit only |
crab
gauge 1230mm |
Kone
5 tonne x 10m hol crab unit x 1230mm gauge dual speed hoisting Single
speed travel. |
| AG3 | 5 tonne | Stahl/ Stringer | monorail & goalposts | 30 metres | 5 tonne goal post monorail system, measurements to be confirmed. Picture |
| AG73 | 6.4 tonne | A Frame gantry on wheels | Braked wheeled A-Frame | 3.757mm wide | Includes 2 x Demag PLV168 3.2t rope hoists working in tandem |
| Ref |
SWL
|
Make |
TYPE |
SPAN |
HEIGHT
OF LIFT/ CRANE SPEED/ MORE INFO |
| AG19 | 15 tonne | Kone | Crab unit for a double girder crane. | N/A | good condition unit, could sell with AG 23 below. |
Used electric HOISTS WANTED call 01527 854 600 for details.
used hoists